Auxbeam + Bulletpoint 8 Gang Switch Panel Mount with 20mm Ball
$18.99 - $44.99
SKU BMS-8GangAux20mm
Auxbeam + Bulletpoint 8 Gang Switch Panel Mount with 20mm Ball
WHAT'S INCLUDED?
(1x) 8 Gang Switch Panel mount with 20mm Ball
(1x) 8 Gang Switch Panel mount with 20mm Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) 8 Gang Switch Panel mount with 20mm Ball
(1x) 1cm Aluminum Mounting Arm
(1x) 1cm Aluminum Mounting Arm
COMPATIBILITY
Looking to secure your Bulletpoint or Auxbeam 8 Circuit Switch Panel to your Bulletpoint Mounting Solutions dash mount? This is the device holder for you!
This all-aluminum device holder is designed specifically to secure your 8-Gang Switch Panel (including the Bulletpoint 8 Circuit Switch Panel). It features laser cut holes which align with the installation hardware found on the back side of your switch panel unit to slide through. Finish securing it with the nuts included with your Switch Panel.
The full coverage mounting plate provides a superior level of stability and features RubiGrid®-inspired slots that complement your RubiGrid® dash mount.
Compatibility
This 8 Circuit switch panel mount fits a wide variety of 8 gang switch panel brands beyond the Auxbeam and Bulletpoint Mounting Solutions. Check out the compatibility section for more applications.
**PATENT PENDING**
20mm Mounting System
This 8 Gang device mount features an integrated 20mm mounting ball making it perfectly compatible with any of our mounting arms with 20mm socket ends (sold separately).
That means if you already have one of our bases and mounting arms, this Auxbeam / Bulletpoint Switch Panel mount can be easily integrated to your existing setup.
Low Profile Version
Looking for a low profile installation? We offer another version of our Auxbeam / Bulletpoint 8 Gang mount but with a 20mm connector end - no mounting arm necessary!
Other Switch Panel Mounts
We make mounts for other switch panels. See them all here: Bulletpoint Switch Panel Device Mounts
Important: no installation hardware is included. You must reuse the nuts and bolts included with your 8 Gang switch panel.
M
I didn't want to drill any holes into my new truck.....searched around the internet and found bullet point. Most solid decision I've made. It was easy to install and it looks good.
P
This mount was just what I was looking for .I mounted it into a 2011 Nissan titan excellent quality and craftsmanship
B
I have an 8 switch Auxbeam panel and I needed a bracket for the back of it to mount to my accessories and it small. It doesn’t fit. I actually bought two and neither fits. Trying to contact support for two weeks. No one will reply to me. I needed it mounted. So I made it work for now hoping someone will contact me and send me the correct one
Hello Bruce, thank you for taking the time to write a review. I see you purchased the 8 gange auxbeam mount and it was delivered 4 days ago on the 10th. It looks like you have an XL size Auxbeam. I am sorry we do not sell one for that model. As stated on our website its not compatible with that size Auxbeam.
J
Worked great for my Auxbeam 8 gang switch panel. Didn’t want to drill into my dashboard and my GMT900 Suburban is full of curved panels. Rock solid mount, very little vibration.
B
The only negative I have with this (which I’ll start with) is I wish it came with the switch. Besides that, it is awesome, just like everything else I own from Bulletpoint. I got the switch as a Christmas present and then had to wait to get the mount before I could begin installing the switch. It did give me time to get the arm (in red), cable management system and the dual ball dash mount. Now everything looks perfect on that side. Time to start the other side of the dash!
F
I purchased the Bulletpoint 8-gang Switch controller and paired it with this Mount and the A-Pillar mount and it turned out amazing.
B
Have not completed install yet but fit and finish is of very good quality.
L
Very happy with this. 4 stars becuase the screws are a little short fot the middle spot. Worls great on the harbor frieght roadshock 8 switch pannel.
K
Too small for auxbeam 8gang switch panel
Hello Ken, thank you for taking the time to write a review. Please reach out to customer support and provide the model number to your Auxbeam. As noted on the website
❌ Not compatible with Auxbeam RA80 XL 5' Large RGB 8 Gang Switch Panel.
If yours is that model that could be the reason its not fitting correctly. Customer support can be reached at support@bulletpointmountingsolution.com
R
Bracket fall short by at least half an inch to be screwed in item was purchased for the eight gang Company should manufacture other sizes to accommodate other brands of a gang panels
J
Worked perfectly for my Auxbeam switch panel. Looked great in my 23 4xe 20th Anniversary Edition. Will look just as good in my 26 Rubicon X!
J
Got this one as one of my options to install in my suv it worked perfectly
A
Holds my Auxbeam panel in place very sturdy and adjustable
P
The quality and fitment was perfect. Great mount for my truck and switch panel. Only thing I wish it had was instruction manuals. I know it’s not hard but there is a little guessing on one part of the installation.
J
Used this on the controller - mounted on my grab handle. Works perfectly
F
Perfect fit for my 8 Gang Auxbeam Switch Panel
R
The Auxbeam + Bulletpoint 8 Gang Switch Panel Mount with 20mm Ball securely mounts to your Bulletpoint mount. The 6 screws that mount the bracket to the switch panel back are ever so slightly off but be patient and it will make a tight fit. Little curious as to why the 20mm ball is located off center of the mount, it does allow you to offset the Auxbeam panel to the driver's side though.
W
Solid design and fits the 8 way panel perfectly
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.