12V Power Supply to Dual Port USB-C + USB-A QC 4.0 Kit

I bought this along with some other item. I want to use this to eliminate cables coming down my dashboard. I had a different brand wireless charger. I plugged it into the usb-c port and it did not work. My charger would turn on - off. Did a little research founs that some usbc porta are newer gen so charger cant talk to it. (Charger works perfectly on usbc ports that i have in my center council) the regular usb runs the charger but that is used to power a different device that is mounted.
So i reached out to support to confirm their wireless chargers would work on the usbc port, i actually believe i checked twice. So i spent the money on a new wire charger. It arrived. It works perfect on the usb,bin this, and the usbcs in my center council but gets nothing on the usbc in this. I can use a usbc from this directly to my phone, which is not what i want. The screen shots show the charging on lower b ut not upper

The charger was relatively easy to install with experience in 12V automotive wiring. My only concern is with the ambient (and unnecessary) blue LED status light. A charger doesn’t need a status light. The status is apparent in whether or not the devices plugged in charge… the status light introduces the issue of a potential power draw. At the very least, it would be nice to know how much of a power draw the status light creates. Thanks for reading.

I purchased this 12v for more charge port during operation road tirp. It has far exceed my expectations. This comes with duel port smd fast charge. Install anywhere with easy installation.

This seems like a quality USB charge port but I think the physical design should be updated for mounting to the RubiGrid. If you top mount it as I assume it is designed and the. Plug USB cables into it you get a quite tall collection of cables on your dash that is unsightly. I bottom mounted my recessing it flush and cut 1.5” holes in the RubiGrid to mount 2 of these. Which gives a much cleaner look. I suggest BulletPoint create a version of this with side mounted USB ports (envision looking at the edge of a notebook PC) this would keep the cables flat on the RubiGrid allowing very neat cable management. Perhaps a 2 port 1 A 1 C and a 4 port version.

I liked it at first. But the fact it only has 1 USB A & 1 USB C made the use of 2 MagSafe charges simultaneously that both look identical unobtainable. One of the power cables had to be changed out. It took adding a hidden 12v socket & a dual USB A charger to get to my desired setup. 2020 F-350

Installed on a ‘24 F150. I already had available power/ground via t-harness behind my radio, install was easy and clean. I wish it wasn’t so bulky. A better solution would be having it mountable in the bottom bracket with cable channel available in the top bracket. It also is led lit which I wish it wasn’t. That’s a distracting reflection off the windshield, and drains the battery unnecessarily while the truck is off (using a constant 12v power source by choice). Functionally it’s great and gets the job done, so still worth it. I may tear it apart and remove the led function if possible.

These USB ports are ideal for providing power to the Rubigrid mount. I purchased two to supply power to 3 devices. The fit, finish and hardware work well with the mount. I would have given it 5 stars but for the length of the power leads which are 6 inches in length. A 12 inch lead would give you the wire needed to mount it to the Rubigrid and then install the tray back into the truck. I mounted this in a 2019 Superduty. Be aware the faceplate on the USB port lights up blue when powered on. This will reflect in the windshield at night. For my superduty it reflects high on the windshield behind the mirror and is not an issue for me.

I'm so happy to have power on the dash.. Actually was pretty easy to install. You just need a little red and black wire and some wire loom. I cringed on drilling a hole..

works great, blue light ring doesn't bother me like some reviews, would have given it 5 stars if the washers on the bolts to attach to the rubigrid weren't too small to properly secure it. had to get new larger washers, other than that it's perfect.

I love the cleaner look this provides for getting power to my Bulletpoint dash mounted devices. No more cords flopping around or in the way. Leads could be a bit longer and the included connectors are useless but these downfalls aren’t enough to keep me from giving it 5 stars.

I was able to get power from a source other than front USB on the truck and get a cleaner look and used a 6 inch c to c plug which fit perfectly.

The replacement power port (Order #289723) mostly works. The USB-A port will not provide enough power to the Garmin RV890 GPS to charge the unit. However, the USB-A port does provide enough power to my Garmin 57 DashCam. I have had to plug the GPS into the USB-A socket of the original power port (Order #273584) and plug the dashcam into the replacement power port. The USB-C sockets on both power pots provide adequate power to my Galaxy S22+ phone. According to my GPS manual, the supplied power from your power port should be adequate to power the GPS. (2A @12V)
While everything is working, I am not 100 percent happy.
For reference in the photo...new port is on the right.

It will do the job but this item is NOT up to par with typical Bulletpoint products. The mounting hardware is smaller and doesn’t match my mounts. The mount is cheap plastic and I’m sure the cover will be breaking off within a year. The wires are maybe 6 inches long and come with spade connections that you need to remove/tape up so you can use the splice connectors provided.

Having the 12v power supply accessories for the track is absolutely essential. They not only keep the charging cables neat and tidy, but also eliminate the hassle of dangling wires. To install them, you need to connect a 14/2 cable from the 12 power supply leads to the cigarette lighter cables. I personally used 3 way splicers near the cigarette cables and 2 way splicers at the 12v power supply leads, resulting in a much cleaner and professional-looking setup. I highly recommend purchasing a wire management kit along with this, as it will help keep the cables organized on the arms and track. Although the product does not come with instructions, a quick online search will provide you with the necessary information to make the installation process much easier.

Having wires all over the place look super ugly in the Jeep JL. This product adds power on the grid so I can hide all of the cords for my chargers. All I had to do was drill a hole in my dash and use a cigarette plug wiring harness to tap power. Amazing product!

Great

Very easy and simple to install.

Simple and easy to install

It works well, but it’s got a blue back light that is always on, there’s no way to switch off the blue back lighting unless you remove power from the whole device. Other than that, it’s nice.

Works great. Install ended up taking more effort on my part. I ended up hardwiring it to my cigarette lighter, and routing the wires became complicated, but works great after it was all done