Height-Adjustable Mounting Arm Support Add-On with Charging Cable Channel
$4.99
SKU BMS-ArmSupport
Height-Adjustable Mounting Arm Support Add-On with Charging Cable Channel
WHAT'S INCLUDED?
COMPATIBILITY
Each Bulletpoint command center is unique and different. Sometimes, heavier devices need a little extra support or maybe your setup uses a longer arm. Whatever the case, our height-adjustable mounting arm support add-on may be exactly what you need!
Added Stability in Seconds
Reduce vibrations, add stability and clean up your setup. This Modular Height-Adjustable Mounting Arm Support is the perfect add-on for anyone running heavier devices or longer mounting arms. With stackable risers and a built-in charging cable channel, this modular support helps you fine-tune your dash mount for optimal performance and organization.
How it Works
This support system attaches to the center portion of any standard Bulletpoint mounting arm between the connector ends (4cm or longer). The base of the support rests directly on your dash or trim, taking the load off the arm and reducing unwanted movement especially when using heavier devices like tablets.
Each of the 5 risers stacks together and snaps into the included mounting arm clip, allowing you to set the height from 5mm (one riser) up to 25mm (all 5 risers). The clip also features a recessed channel so your charging cable runs neatly underneath the arm – no more dangling cords!
What's Included?
- 1x Mounting Arm Clip with integrated cable channel
- 5x Stackable 5mm Risers (total adjustable height: 5mm to 25mm)
Compatibility
This mounting arm support add-on works with all standard Bulletpoint mounting arms (4cm and longer). It is not compatible with Micro or Mini arms since the center sections are not long enough.
Pro Tip: It can be installed anywhere along the center section of the mounting arm but we recommend placing it closer to the device side.
Why You Might Need This!
If you’ve noticed your device bouncing or vibrating while driving especially over rough terrain, this support system is for you.
- Stabilizes your device by adding a second point of contact with the mounting surface
- Ideal for heavier devices or longer mounting arms
- Helps prevent long-term wear on connector ends and mounting balls
Built-in Charging Cable Channel
The integrated cable channel in the arm clip keeps your charging cable neatly tucked away under the arm. This creates a cleaner, more organized dash setup and eliminates cable clutter.
For even more cable organization, pair it with our 7-piece Cable Management Kit.
Easy Installation
- Snap 0 to 5 risers into the mounting arm clip to reach your desired height
- Optional: Run your charging wire through the recessed channel
- Slide the clip around the mounting arm
- Ensure the base of the support rests on your dash or trim
No tools required. Everything snaps together securely for a solid & rattle-free fit.
D
These supports completely prevent the bouncing that occurred without them. Roads and highways are terrible and without these supports the mounting arms bounce all over the place. Must have item.
R
My ham radio control head is a bit heavy and I couldn’t get the arm to stop dropping. I was trying to decide how to make a piece to go under it for support when I received an email with the arm support. It worked perfectly.
R
Exactly what I was wanting, was going to look on Amazon for a rubber pad but this is better. Now need a right angle connector that goes towards the rear instead of the sides as you see in the pic. Would give the ultimate stealth integrated look I want
N
I really wish these would come with two of the mounting arm clips. As you can use the unused spacers for another arm. This would give you more bang for your buck. I do however really like the way that it stabilizes the arm. Bulletpoint please add two mounting arm clips to this kit. This is a great product and does great at helping to stabilize the arm now matter how short or long the arm you may have for your setup.
S
Purchased the tablet holder for my 19 Ram. Worked great, but was bouncy, to the point I had to brace it with a towel or a bunch of napkins. This works perfectly and is obviously a far better solution.
R
I ran across this arm support on social media. This piece supported the mounting arm perfectly. I had a bit of vibration on certain roads in my area. This support stopped the phone mounting arm from jiggling.
K
Bulletpoint is great...everything is ordered from them works exactly as it should!
D
Glad I purchased. Does what is necessary
D
Haven’t mounted everything yet but having these height adjustable braces to relieve the stress of the weight is handy.
E
It added stability to the system. Easily adjustable. Thanks guys.
C
This makes such a huge difference while driving to keep your devices from bouncing around
J
Wrote an original review stating bouncy mount. Bullet point reached out and got me one of these guys. Solved my issue rate away. Customer service of champions right there!
T
I have the rubigrid on my F450 with a phone, Tpms, and monitor for a rear rv camera. I put the shortest arms I could on there, but they still drooped down over a short amount of time. I contacted bulletpoint and they recommended these items and it totally prevents droop now. I recommend this product, plus everything else they sell. The customer service is second to no one! I buy from them for every truck I have and In my opinion they are the standard on mounts that others try to mimic.
J
Love it
S
If you have any areas of contact, these work perfectly and also provide excellent extra support.
l
SHOULD COME WITH ALL KITS
S
Completely stopped the shaking of my RV rear camera. Great solution and fixed the problem.
W
Great addition for larger items such as display screens.
R
This works well at stopping vibration and adding support. Good quality and works great.
C
I bought this because I need to stabilize a vertically oriented arm that keeps vibrating downwards. I thought I could put a piece of double-sided tape on it and stick it to my dash. But the rubbery material wont allow that.
I would suggest that BP develope a new, hard plastic disc that this could come with along with a circle of double-sided sticky tape. this would allow it to stick to the dash and firm up vertical applications.
H
The adjustable mounting is what I expected. So far, I am happy with it, and it's providing the support I need.
R
This little support makes all the difference in the bouncing and vibration. I can now clearly record my trail rides, beach days, mountain cruises, road trips etc. Very happy with the purchase
A
Exactly what I needed to add just that finishing touch of stability to my phone and Tablet mount. The mounts were plenty of sturdy on their own, but I do a lot of off roading so this stabilized them both perfect!
M
These are nice, especially in semi’s with vibration etc.
J
Nice product, great stabizer for those long reaching arms. Has a slight give to the material so it can absorb some shock as well. I’ll be back for more Bulletpoint parts to finish out my dashboard build very soon.
T
Always great products, have order several items for my truck. Built tough and great quality.
A
I purchased these hoping they would reduce vibration and they work well! The easily adjustable sections were a great idea and provide added support for heavier devices.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.