Bulletpoint Wireless Phone Charger with Motorized Cradle

This set up was easy to install and get situated in my Bronco. Works as designed. I would recommend to others desiring a trick cell phone mounting solution.

Great product, easy to install and it looks really good

I purchased the motorized cradle for my wife to use in her Bronco. She likes how easy it is to use and it also charges her iPhone. The cradle holds her iPhone Air with thin case very well. It pairs nicely with the Telescoping Matte Color Carbon Fiber Mounting Arm that we purchased as well. No problem with the motorized cradle and the mounting arm is great too, but has one weakness. When the phone is mounted and try to make any adjustments, if one twists the cradle to the right, it causes the arm to loosen. Otherwise, extremely happy with the mounting solution.

Had an issue with another mount and Bulletpoint customer service was top notch to help me figure out what's best. This is the only mounting solution I will ever use. Thank you

I bought one of these wireless phine chargers and it quit working. After talking to the service department, I was informed that I did not have sufficient power (using the 5amp charger rather than the 12volt charging port). Made sense to me, so I bought a new one for my fault. A couple months later, my 2nd charger quit working. I emailed back to the same thread that I originally started on the first one. I also included pics of the power source and how I used the 12 volt socket only. They were quick to respond and sent a new charger immediately in the mail. You dont find this service much anymore. Bulletpoint has a customer for life with me and how they treated the situation. 10 stars!!!

I purchased this for my 2025 Toyota Tacoma to mount on the hand rail be passenger seat for a long trip to share with my wife for a long trip and it was wonderful to be able to turn it for her or me driving. It kept our phoned charged the whole trip and it was at a height the was good to be able to see the screen.
I plugged this into my USB-C port of my truck to find that was not the proper power source and it burned out the motor.
I emailed their support on a Sunday and someone respond within 30 minute to get this replaced. They sent me a new motorized cradle plus the cigarette adaptor to power it properly at no charge. It arrived within 3-4 days. I was very impressed with this service and responses time.
Thank you for being a great company.

My husband bought me the Wireless Charger from Bulletpoint and then borrowed my Jeep and accidentally broke the bottom cradle. When we attended the 2026 GSMJI we came across their booth. I mentioned to Alex that my husband had broken the cradle and she handed me her card telling me to reach out for a new unit. Not only did they fix my issue, I received the new unit within 2 days of sending my email!

True Customer Service is so hard to find these days, when you find it 😘 chef's kiss! Thank you all!!

Great product love it

Great device. Nice to auto open and charge. Had a defective unit and customer service promptly replaced the unit. Excellent customer service.

This thing is great. The magnetic charger and the mechanical jaw that clamps on the phone automatically.
But I really like the “motorcycle handlebar clamp. I drive truck and most newer truck have this bar by the door,
I’m in and out of different trucks and this allows me to hook up my phone quickly from truck to truck.

Would give more stars if I could.
Great mounting solutions. I even purchased items for other vehicles, that I thought would work for my project, and they did. Very universal.
Can't go wrong with Bulletpoint Mounts.

I purchased the Rubigrid with 2 motorized cradles. These are working great! So great that I ordered another for my RV. Can't wait till it arrives to get that bad boy mounted! Great product and I recommend them!

This is the third purchase in 3 years.
All 3 vehicle applications have worked perfect.
TUNDA, RAM & Now Bronco Raptor.
Great solution and 100% happy.

I am making this review because I searched forever to see if it would fit my phone and case but couldn't find a review confirming it. Due to the dimensions of my phone with the case and what the website said, it was questionable, so I decided to buy it and give it a shot and pray for the best! I can confirm, this cradle does fit an iPhone 17 Pro Max with an Otterbox Defender case.... but barely. When the cradle is in the fully open position, it will go in, but when the cradle automatically closes, it barely has to move inward to make contact with the side of the phone case. You will have to play with the positioning of the bottom rest to find the perfect spot where the raised camera portion of the phone case rests just above the top of the cradle. This will allow the back of the phone to lay perfectly flat against the cradle for wireless charging. You can see in my attached image that the phone is charging. The USB cord seen in the picture is plugged into the USB port of the cradle, not the phone. When pressing the button to electronically release the phone, it comes out easily, with just a slight bit of drag from the tips of the arms of the mount, but again, the mount is barely big enough for the phone and case. The arms actually angle slightly inward as they get further away from the base, so when the phone's back is against the cradle, there is about a quarter inch of clearance on each side before the case closes.

I live in Indiana and frequently travel on Interstate 70. Anyone who has ever driven a single mile of I-70 in Indiana knows that this is the ultimate proving ground for phone cradle grip strength. I am happy to report that this cradle is Rodeo-70 approved, griping firmly enough that the phone never fell out or lost connection with the wireless charging. My back on the other hand.... Chiropractor visit next week!

My previous cradle was the BulletPoint MagSafe Wireless charger with cooling fan. It was mounted in the exact same location as this new cradle in the image, and although it worked most of the time, it was definitely not Rodeo-70 approved as it fell from the mount daily. The iPhone 17 Pro Max with an Otterbox Defender case is rather heavy for the magnet on that mount and you could tell when you placed in on the magnet or removed it, it was just barely hanging on.

This is definitely a great upgrade and I wish I would have bought it before I bought the previous mount so that I could have saved the money. Oh well. Lessons learned.

When works, charges great! The only issue the motors works random, and is not possible open it manually. I tried differents power sources and with same issues. This is not only in one device, I bought 4 and all have the same issue. I can see the red light in the side.

Thank you Bulletpoint Solutions for assisting me with selecting the right phone holder. It works as expected and my phone is secured much better. Highly recommend this product for all.

I am very impressed with how sturdy this wireless charger is. Is excepted my large Google pixel with no problems!

Great product, mounted several to my 4 Runner love it.

Easy to install and looks factory