20mm Flange Socket to 25mm (1 Inch) Ball Adapter
$13.59
SKU BMS-20Flange25Ball
20mm Flange Socket to 25mm (1 Inch) Ball Adapter
This socket ball may be used to transform any of our fixed 20mm balls to a 1” machined aluminum ball. Once converted, the 1” ball can be used with third party arms designed for 1” ball mounts.
Like all of our 20mm ball mount products, this adapter provides almost infinite adjustability thanks to the integrated thumbscrew and includes the Bulletpoint Limited Lifetime Warranty.
R
With the short pole and this ball adapter, give the perfect height to your cell on the dash. Gives a clear vision out of the front windshield.
T
I found the Bulletpoint 20mm ball to a 1” ball when looking for a solution to mount my Inreach Mini to an Offroam - Air Vent Ball Mounting Base with 20mm ball. This solution worked great and the quality of both the Bulletpoint and Offroam is very good. I have also purchased the Bulletpoint Tacoma Dash Mount 2016-2023 Toyota Tacoma Phone Mount & Device Mounting Solution to mount my Galaxy Tab S7. This mount was very easy to install and appears to be solid. (Have yet to try it offroad. The base is held by four screws with no backing plate on the bottom compared with other dash mount solutions. Time will tell, easy to fix if additional support is required) The Base with 3 balls is the lowest cost option versus others. But be aware the balls are 20mm not the standard RAM mount 25mm. I also liked that the Tacoma mount installation did not interfere with the location of the ProClip phone mount. I had no issues with ordering or delivery.
S
Well I have a 2022 Silverado 2500HD The center section on the dash was one piece.(It did not pop out with the provided tool like the video shows) However I was able to make it work!
D
Bought to extend phone mount since they don't offer a 20mm ball on adapter. Found a longer bolt to make it work since the provided bolt was too short.
J
.....I was disappointed in the fact that I even needed to purchase this to allow me to use another product I purchased from them to work.
So much of the rest of the world is working with 1" balls rather than the 20mm balls this vendor prefers.
B
Worked great to convert the ball size for my radar mount.
E
It would have been better if I could have ordered the mount with this size ball instead of having to buy another part to convert it to the size I needed.
G
I like the solution this product makes to join dissimilar sized ball joints together: in my case, joining a PanaVise phone holder with a 20mm ball mount to a Ram Mount arm than accepts a 1” (25mm) ball.
D
I used this to connect mu BulletPoint mount to my Ram mount system that uses a 1” ball. It worked perfectly and gave me more location adjustment to put my phone where I wanted it.
J
Received product, wrong size (my fault). However, after reaching out, company told me that I needed a specific item. I ordered, as they recommended. Received, and still not what I needed. Moved on to another supplier. Buyer Beware!
Hello Jimmy, I am sorry but that is not remotely close to how I understood your question. Your question was 'Purchased the cupholder mount (small RAM mount). I need a large RAM to mount my Garmin Overlander Tread XL. Do you have the cupholder with the larger RAM size?'
I understood this to mean do I have a cupholder with a 1' ball. What I referred you to was how to make the cup holder have a one inch ball since the question was 'Do you have the cupholder with the larger RAM size?'
I am sorry I am not sure how that was to mean you needed to find a way to mount the Garmin. We recommend using our amps ball but that wont work on your Ram arm.
The rear of the Garmin Overlander® unit has an integrated 4-Hole AMPS pattern. Simply attach one of our4-Hole AMPS ball mounts to the rear of the Garmin® unit and from there, any of our standard mounting arms can be used to make the connection between any of our dash mounts and the Garmin® unit.
In this situation you would use a Ram brand amps ball to match your Ram brand arm. If you are going to use your Ram brand arm on our cup holder than you need the flange socket I recommended. Please let us know if you have any further questions.
G
Very quick shipping & accurate shipping tracking
L
Perfect!
S
Look and work great
A
Excellent product same as the customer support!!
M
Couldn't use for intended purpose. The clamp on the 20mm ball I had installed slipped too much - allowing the arm I attached to the 1in ball to fall forward.
Design would benefit from 1) some type of surface in 20mm clamp to increase resistance and 2) larger screw **** for tightening.
Hello Mike. Thank you for taking the time to write a review. It sounds like you were trying to use a 20mm flange on a 1' ball which is not going to work. We recommend using the flange for the 1' ball. Below is the link to them. If you have any questions please feel free to reach out to customer support. They are happy to help.
https://bullotpointmountingsolutions.shop/products/flange-socket-converts-20mm-arm-end-to-accommodate-1-ball?variant=40429456883827
M
This is the only adapter I found online that accommodated a 20mm socket with a 25mm ball and the quality was so good as well.
D
Excellent product.
Would recommend.
J
They enabled me to add very nice automated bulletpoint phone mounts/chargers to the dash RAM mount of my B-Van. Perfect!
e
I have never been so satisfied with a phone mount in my life. This assists in keeping my phone steady and in one place. I didn't have to return the mount because of this adapter, so it totally fixed everything. Thanks guys
T
Long story short my RAM mount wasn't quite working for me in my new truck and saw the mounting plate. I got the plate but forgot to check the compatibility. So, after getting the adaptor and adjusting the mount, I have nothing but praise for the system overall. It's made of solid construction and basically has no play when tightened. The adaptor also adds an extra joint for adjustability.
S
Look and works great
K
I purchased a mount for my 4Runner from another company and was bummed when my 1" mount didn't fit. I didn't realize that the mount I purchased was 20mm but then I found this little attachment and it's perfect!
R
Just what I needed to mount with my accessory mount
T
Was needing to adapt the mic holder with 20mm ball to a 1" ball from a different mount system. Works well. I was concerned at first as there didn't seem to be any friction addition, but it is holding quite securely.
J
While I'm glad there is an adapter, I still hate getting sucked into a proprietary-sized mount. The Bulletpoint mounts are very secure, but trying to lock your customers into just buying from you like this is petty and non-customer-centric.
D
Great product
G
Helped me install my X Ram holder on a dash mount in my Tacoma. Adapter works great.
J
Bulletproof mounting for my phone. Previous mount was never stable on any kind of bumps. Now it is rock solid
Limited Lifetime Warranty
Our Warranty
This product comes with our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.